There are many things I hope to write about over the next week but I’m going to start with a simple update announcement concerning a brand-new addition to this blog/website…
Read more of this post
My latest YouTube video made it to the internet over the weekend and I’m pleased to say that, for the first time in 3 months, it’s a proper woodworking video and not something I knocked together in my flat (although, there are still more of those to come).
However, I was a little dismayed to realise, through the process of editing my footage, that I made this batch of marking gauges back in MARCH of last year… I was quite certain I did this towards the end of summer/early autumn… But seeing as that I didn’t move in to this flat until November, there’s a good chance therefore that I’ll have a few more videos from the workshop on their way in to your subscription feed gradually between now and Christmas. 😉
To give a brief bit of background as to why I made these gauges; well, I’d only ever owned one single gauge (made by Marples) up until this point and when I started my current job over 3 years ago, a need arose to have one in box my toolboxes at work and also at home. But I was reluctant to spend £15-20 on another (in fact, the one I had is made of beech and perhaps only £5-10). So, I took a long term ambition and made my own!
If you watch this video over on YouTube then I’d be grateful if you could give me a thumbs up (click Like) and also if you wouldn’t mind subscribing to my channel, if you haven’t done so already – I’m almost up to 2,000 subscribers and I’d love to break that milestone fairly soon.
Thanks for watching! There will always be something more to follow!
Living in a home that’s still holding on to more than an average share of hand tools, it’s hard to resist that urge to pick them up and to make something. This one will feature as a YouTube video at some point but I’d like to share some photos with you now.
You may remember that I purchased a portable TecTake washer/dryer back in March and one of my goals since has been to make this compact unit fully portable. So, what I’ve gone and done is I’ve mounted it on wheels!
Read more of this post
My latest YouTube video offers a couple of simple tips on using and maintaining your dust extractors that could help to maintain and restore your airflow. If you’ve suffered a loss of or drop in suction from either a twin-bag HVLP chip collector or, perhaps even a smaller HPLV vacuum-type; these tricks could really help you out.
One tip near the beginning offers an easier way to reattach the bottom bag without a second pair of hands. Also, you get to see how convenient it isn’t to access each of my extractors in a small workshop! 😉
I run an Axminster ADE1200 for collecting larger shavings and a Nilfisk-Alto Aero 25-21 for finer dust, which is partially filtered through a Triton DCA300 Dust Bucket.
Thank you and enjoy. 🙂
This is the subject of my latest YouTube video, which has just been uploaded this evening. There are probably a few other recent uploads that I haven’t announced to all of you directly so, it is always worth manually checking my channel from time to time (and, of course; subscribing makes that even easier!). I seem to have created a situation where I have a stack of video content on my hard drive (a good three or four videos-worth). This is a complete contrast to my situation earlier in the year, where I was struggling to even record the basic content for editing… Now, I can’t seem to keep up with myself! 😉
Truing a bandsaw tyre has often been a popular topic for this blog and it certainly brings its share of traffic my way from some of the usual search engines. I’m aiming to have at least one more tool-relevant video on the way soon but, over the weekend, I hope you bring you footage of a small project (yes, an actual project) that I completed last week. If you’re really lucky, it may even feature my first attempts at narration!
As always, constructive feedback is welcome but I hope you hope you find this one useful and informative at the very least.
Thank you. 🙂
This is actually a subject I discuss briefly at the introduction to my latest YouTube video. It’s fair to say that you will quickly come to learn how I feel about painting and why it took me five-months to complete the laminated capping rail for our T&G gate… Oddly enough, I’ve spent the afternoon undercoating my hands a glossy white as we’ve been partitioning off a new section of the shop floor ready for the installation of two new metal cutting machines (it has been nice to be able to put of some stud walls and drill holes in the concrete floor, even if I’m not too satisfied with some of the gaps around my own joints, mostly cut on the bandsaw as well…).
We moved in to our current house back in 2004, not long after Christmas and, within days of moving in (in fact, it might have been the day itself), a now-ex-neighbour pointed out that flakes of white paint were
ing off from under the eaves at the front of the house, surrounding the large bay window. It’s a project that’s been on my mind for so long. It’d been glaring at me each day I arrived home. Even when I lived elsewhere, it became unmissable, with each and every family visit. I don’t know what possessed me but I finally got up there to tackle it, last weekend.
Read more of this post
I seem to be focussing heavily on video blogging lately and that’s distracting me from keeping this blog updated. There are lots of little updates and pieces happening most of them time and I find it far easier to either upload a Keek or maybe a photo to Instagram. I’m hoping that some of you have already seen my latest video but I’d like to bring it your attention today in case you haven’t seen it already:
It documents the making of a reversible short rip fence that I made for my Scheppach TKU saw bench. You could make the same thing for your own table saw or even for a bandsaw. It is dead simple to make and does feature the ‘shop-made T-track that I’ve used on other pieces in the past (namely my router tables). It was meant to be a short video but the final edit still surpasses the 10-minute mark (cut from over 40)! I tried putting music in the background of this one and it’s something I’ll try to stick with… But I’ll try to make it a bit quieter next time, as I can’t seem to make my voice any louder! 😛
This weekend, I’m hoping to upload the final instalment of my latest cutting board videos after they were very gratefully received by the client yesterday afternoon. There’s probably another one-hour-plus of footage to sift through so, I’d guess we’re looking at another 15-minute video (45 minutes in all… I should’ve made it a DVD!! :-D). I’ve had a lot of trouble with Windows Movie Maker lately but, fingers crossed, it is stable right now after much downloading and updating of various bits and pieces!
I’m also aware that today is the 1st of June and I’d like to be looking to move out of my mum’s home by Christmas, which will coincide with the dreaded clearout of my workshop… I could have three months left; I could have five. I recently put some sash clamps for sale over on UKWorkshop and there’ll be other little bits to come between now and whenever ‘then’ may be.
Thanks to you all. 🙂
At work today, I spent a lot of time thinking about how I haven’t done a video for over one month now; how much I want to make the most of what time I have left in my workshop; how I need to crack on and finish the mobile base I started for my table saw, weeks ago… All whilst banging nail after nail in to small sheets of wavy birch plywood!
So, I was home by 17.00 and, after briefly stopping in the bathroom, I grabbed my camera and headed straight out to the workshop! Evenings have been almost mild this week (even though forecasters are now forewarning the threat of snow to follow this weekend – just when we were opening our arms to welcome the spring!). In two hours, I managed to get the following filmed and also, I made some good progress on the mobile base, which I’ll share with you another time.
This is something that I originally intended to film and publish about a month ago during Get Woodworking Week… I also have a ‘Valentine’s Gift’ idea that I’d like to film at some point but, it looks like I’m going to sail straight past Mother’s Day with that one as well! This video’s all about cutting a tee-halving joint, which is a traditional form of lap-joint, between two pieces at 90°.
I hope you enjoy the video. I’m incredibly nervous and fast-talking infront of the camera but I welcome all and any comments people may have. It takes a good hour for me to upload a video of this length and I do now try to keep them brief… That also means compromising a little on the finished quality but then, I’m only using Windows Movie Maker, which is a free program.
If I was to use something paid-for (like Camtasia), would I able to experience faster upload speeds?
Ideally, I’d like to have one short video to upload once each week. In fact, from the video I’m sharing with you this evening, I could easily have cut a section from the end and published that under its own heading.
Thanks both for reading and for watching!