Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: Scandinavian redwood

Folding Desk, Day Three

Continuing straight on from Saturday’s efforts in the previous post; Sunday began with the finalisation of a few areas in preparation for the final assembly and glue-up of the rear ‘fixed’ portion of the folding desk.

I wanted to cut away a portion of each ‘foot’ so that it would sit more comfortably on a level floor and, as luck would have it, my under-used 6in diameter Sander Sitter provided me with the perfect radius. I cut the waste away with a jigsaw and cleaned it up a bit on my bobbin sander.

Read more of this post

Day Two on the Desk

I’ve probably said this before but, it really never seizes to amaze me just how long even a ‘simple’ pine project can take to make! You visualise all the basic things but, in spite of the training I’ve had in making furniture, I easily forget some of the necessary practices – like sanding to remove machining marks. I do sometimes wish I had a drum sander to simply send boards through as I seem to be going through 120g 4in wide sanding belts at an alarming rate. Pine is sticky stuff with all the resins and that doesn’t help. Really, I should be looking to use 80g for all the donkey work (that would explain why I haven’t so many 80g belts left but, I’m now down to my final 120g belt in the box…).

Plenty has been going over the weekend and, if I were to update it all in this single post, you’d still be reading it by the time I leave for work tomorrow morning (once I’d finished writing it!). So, in this post, I’ll just update you on Saturday’s events, with Sunday’s efforts to follow tomorrow (I’m secretly hoping to have this finished-or-very-close by next weekend…!).

Read more of this post

Making a T&G Gate (Part 1)

My poor, lonely workshop. I haven’t been able to make much use of it recently, even with the three-day Bank Holiday weekend that’s just passed. Still, in an effort to clear some more excess wood from inside, I have been making some progress on a tongue and groove gate I promised I’d make and fit for my mother, erm, over a year ago… 😳

Read more of this post

Too Many DVDs?

When I first started woodworking at home, back in the summer of 2005, the very first piece I made was a simple ‘Craftsman-style‘ wall shelf in pine (Scandinavian, joinery-grade redwood). I took the plans directly from a book [The World’s Best Storage and Shelving Projects] and modified various dimensions in order for the unit to accommodate my stash of DVDs. Despite its garish appearance with the tung oil finish and the crudeness of some of the joints I used (particularly the beech dowels used to peg the shelves), this wall shelf made the move with me to my new home at the end of March this year. All in spite of the fact that, with a total capacity for forty-eight DVDs on each of the two lower shelves, it wasn’t long after the completion date that my DVD collection had over-grown [thanks, Play.com and CD-WOW!!] and I was having to stack cases on top of the unit to try and keep things ‘organised’!

One Shelf... Too Many DVDs!

It’s taken me almost six-years to make this decision but, I’ve decided now that the time is right to build a new wall shelf with increased capacity!

Read more of this post

Bad Door Made Good (Part 2)

Continuing straight on from Part 1 then; I picked up a few lengths of 4x2in redwood (unsorted) from my local timber merchant, Staddons. I went in with the intention of buying saw boards and preparing them myself but, I knew I would only struggle to plane even two 2.1m lengths in my workshop (those 1.8m lengths I used for my workbench last year proved to be enough of a challenge!). So, I payed a bit extra (about £50 in total) I bought my materials with a finished size of 94x44mm, which is ideal. They were even kind enough to select a couple of straight lengths for the stiles, at my request – I couldn’t fault the timber that was chosen for me. Perhaps not the kind of service you’d expect to find at a larger yard, which is why I like using these guys for small orders like this. You’re not allowed anywhere near to the timber for H&S reasons but, having them select the boards for you is the next best thing. 😎

Read more of this post

%d bloggers like this: