Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: renovation

Bathroom Bedlam (Part 1)

This is something I’ve been working on for a couple of weeks now – that is to say, that I started it a fortnight ago and, although I’ve not been working on it solidly or with any kind of routine, the work is still very much in progress.

The Problem.

After creating an agreement with my landlord, I’ve begun to look at the cause of the damp patch that has slowly grown beside the shower in my bathroom and to move forward with the rectification of this problem.

Read more of this post

Advertisements

New Year, New Post

Some of you may recall that I had to replace a rotten fence post last spring, repairing the breeze-battered panel in the process. That’s been bringing a lot of traffic to my site recently, which my come as know surprise to you, if you live in the UK and you’ve had to experience some of the recent natural forces. I had to do the same again last weekend but on the opposite fence and so, I thought I’d write about that as well, because there are some differences.

When the wind blows…

Read more of this post

The P-Word

This is actually a subject I discuss briefly at the introduction to my latest YouTube video. It’s fair to say that you will quickly come to learn how I feel about painting and why it took me five-months to complete the laminated capping rail for our T&G gate… Oddly enough, I’ve spent the afternoon undercoating my hands a glossy white as we’ve been partitioning off a new section of the shop floor ready for the installation of two new metal cutting machines (it has been nice to be able to put of some stud walls and drill holes in the concrete floor, even if I’m not too satisfied with some of the gaps around my own joints, mostly cut on the bandsaw as well…).

We moved in to our current house back in 2004, not long after Christmas and, within days of moving in (in fact, it might have been the day itself), a now-ex-neighbour pointed out that flakes of white paint were

Peeling Paint

ing off from under the eaves at the front of the house, surrounding the large bay window. It’s a project that’s been on my mind for so long. It’d been glaring at me each day I arrived home. Even when I lived elsewhere, it became unmissable, with each and every family visit. I don’t know what possessed me but I finally got up there to tackle it, last weekend.

Read more of this post

Hanging Out

With the 7x2in joists all cut to length, ends re-sealed and ready to fall in to place, my next job was to set out the positioning and spacings for each of the sixteen hangers (eight on either side) and then, to fit them in to place. Below, you can see a mock-up of what I needed to achieve, where the joist must sit 32mm (1¼in) higher than the wall plates, in order to clear the existing truss-frame by a good 5mm, which had already begun to deflect where I’ve previously used it, in appropriately, to store goods (it’s only 4in/100mm deep and is riddled with woodworm, you see).

Read more of this post

%d bloggers like this: