Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: power tool

It’s Nigh

It was made official that my mum has now sold her house. It’s not bad going, considering it’d barely been on the market for two months but I’m now facing an ultimatum that I’ve been trying to avoid, even though it’s presence has been looming for a while… I need to start clearing out my workshop and I’m no longer talking about simply decluttering the unnecessary and the under-used…

20140204_190617

Read more of this post

Advertisements

Making Hoses Fit

If you’ve ever tried to connect a vacuum to your portable power tools, you’re likely to have come across one (if not several) where the supplied nozzle at the end of the hose doesn’t even come close to fitting snugly in to the tool’s outlet. Some people will resort to using masking tape or scraps of PVC pipe; worse still (and I’ve been guilty of this many times) is where people decide to neglect the use of dust extraction and then proceed to cut, plane, rout or sand away with fine particles filling their workshops!

20131018_181954

On Friday, while I was waiting for the glue to dry on a pair of chess boards (more on the perils of gluing end-grain to end-grain another time), I decided to have a go at making an attachment that would connect my vacuum to my random orbital sander. As you can see above; it works and I got the idea initially from (I think) Chris Pine over on Keek (@cpine).

20131018_172645

An additional tip for drilling small squares safely!

You basically take two small squares of plywood, drilling one hole in each. In one block, you have a hole sized to take the nozzle from the vacuum; the other is drilled to fit over your tool’s outlet or port. Then, these two blocks are carefully glued together and I rounded the corners off to make it aesthetically pleasing.

It’s a custom solution that doesn’t cost a lot but might ensure you never run out of masking tape. You may still need to manufacture one ‘fitting’ for each of your tools but, if it means you’re more likely to use dust extraction then it’s worth it.

Thanks for reading and I hope you’ve found this tip useful.

The Clock’s Ticking…

It is September and summer’s gone. Winter will soon be here and that means I wouldn’t usually have long left before having to think about wrapping up and hibernation… This year, however, there’s one very big difference and it’s something I’ve touched on in the past. I think it was first mentioned at the beginning of 2013 but I’ve been almost avoiding it ever since, in the hope that it might not actually happen…

So, I’ve been living back at my mum’s house for over a year now and that’s also where my workshop is. I’m looking to move out again because I need my own space and she’s has thoughts of selling on her mind for a long while. If I go, she has to sell. If I stay, there’s no guarantee that I’ll be happy in my home life, which is perhaps the one part we should not neglect.

So, the piggy-in-the-middle here has go to be my workshop…

Read more of this post

Dust Extraction Tips

My latest YouTube video offers a couple of simple tips on using and maintaining your dust extractors that could help to maintain and restore your airflow. If you’ve suffered a loss of or drop in suction from either a twin-bag HVLP chip collector or, perhaps even a smaller HPLV vacuum-type; these tricks could really help you out.

One tip near the beginning offers an easier way to reattach the bottom bag without a second pair of hands. Also, you get to see how convenient it isn’t to access each of my extractors in a small workshop! 😉

I run an Axminster ADE1200 for collecting larger shavings and a Nilfisk-Alto Aero 25-21 for finer dust, which is partially filtered through a Triton DCA300 Dust Bucket.

Thank you and enjoy. 🙂

Down the Pan…

This very morning, I was expecting to be driving in to the city of Bristol in order to collect a pack of 1¼in long coarse-thread pocket hole screws with washer heads, so that I could join some 18mm MDF later on today (I’m planning to make a short rip fence for my saw bench). A quick Google search yesterday afternoon to determine the store location revealed that they ceased trading at the beginning of February!

Pan Tools in Bedminster – sadly, no longer trading.

We’re talking about Pan Tools; a name that’s been synonymous with power tool purchases in this city for several years.

Read more of this post

I’d Rather Have Snow…

Just as I was getting dressed and ready to leave the house for work this morning, there was a knock on my bedroom door. Mum was eager to tell me that another fence panel had blown down overnight; narrowly missing her car and lying obtrusively on the drive. It wasn’t the panel I ‘repaired’ over the weekend – as I said then; that one’s never going to come out!! This one is as tall as it is wide.

A new day and another panel falls to the ground!

These photos were taken in the daylight, after I arrived home from work a couple of hours ago, using my phone as well (8 megapixels, apparently… Although, I rarely bother to preset the white balance). All I did in the darkness was to pick up all the loose stuff and to dump it infront of the workshop.

Read more of this post

Daily Prompt: ‘Ch-Ch-Ch-Ch-Changes’

Today’s Writing Prompt

You need to make a major change in your life. Do you make it all at once, cold turkey style, or incrementally?

Read more of this post

First Lot to Go

It may be cold outside and there may still be snow on the ground, with the threat of more to follow later in the week but, I still made it out to the workshop today! Only to arrange some hand and portable power tools that I no longer ‘need’ and can sell… Still, it was nice to get out there briefly. Even though my work gloves felt like sheets of ice, as I picked them up from my workbench.

ALL FOR SALE!

This is my first ‘wave’ in the process of decluttering my workshop, freeing up some space and, of course, preparing for the inevitable. Read on below, and you’ll see what I’m selling and why I no longer need it.

Read more of this post

%d bloggers like this: