Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: keek

Keeping Busy

It’s hard to find the time to write regularly here at the moment. I have a couple of detailed posts I plan to write soon but those are the ones I mostly seem to aim for. For quick updates on more of a typical ‘blogging’ scale, I tend to use either Keek or my Facebook page. But I suspect that not everyone subscribes or visits there; not everyone has Facebook or ‘does’ social networking. So, I’d like to try and update you all with a few snippets of all the little things I’m working on at the moment.

New handles for old files.

New handles for old files.

Read more of this post

Advertisements

Mounting Time?

A few days ago, I found myself wanting to record and upload a Keek that would be entered in Richard Morley’s competition (or #keekcontest). You can click here to see a complete list of the entries submitted (each one is no more than 36-seconds long) but the basic requirement was simply that we would need to ‘rout something’.

A temporary tripod-mount for my smartphone.

To suit my intentions, I needed a device to hold my smart phone while I performed an operation on the router table (working single-handedly with any machinery is never safe). I just about managed to clamp the magnetic flip-case of my smart phone to the lightweight, aluminium tripod I use with my digital camera but it’s now got me thinking about making a more permanent fixture for this set up…

Read more of this post

A Bad Turn

I’ve been Keeking a lot lately about a project I started. It was something that I initially wanted to remain as ‘secret’ until a big unveiling with a YouTube video; laminating layer after layer of American lime from my offcuts stash, as the odd follower made their guess or suggestion as to what it might be. Two people were very close and in fact, it you were to halve each of their answers (bandsaw box and a turned bowl) and to bring two of those halves together, you would’ve come to the correct conclusion of a Bandsaw Bowl.

This is why you shouldn’t operate a bandsaw at 21.30…

It was all going so well until I mounted it on a circle cutting jig last night. Now, this beech lump o’ lime looks like to find a space in one of my stocked up bags of firewood, ready for collection by someone… From somewhere.

Read more of this post

Short Rip Fence and an Update

I seem to be focussing heavily on video blogging lately and that’s distracting me from keeping this blog updated. There are lots of little updates and pieces happening most of them time and I find it far easier to either upload a Keek or maybe a photo to Instagram. I’m hoping that some of you have already seen my latest video but I’d like to bring it your attention today in case you haven’t seen it already:

It documents the making of a reversible short rip fence that I made for my Scheppach TKU saw bench. You could make the same thing for your own table saw or even for a bandsaw. It is dead simple to make and does feature the ‘shop-made T-track that I’ve used on other pieces in the past (namely my router tables). It was meant to be a short video but the final edit still surpasses the 10-minute mark (cut from over 40)! I tried putting music in the background of this one and it’s something I’ll try to stick with… But I’ll try to make it a bit quieter next time, as I can’t seem to make my voice any louder! πŸ˜›

This weekend, I’m hoping to upload the final instalment of my latest cutting board videos after they were very gratefully received by the client yesterday afternoon. There’s probably another one-hour-plus of footage to sift through so, I’d guess we’re looking at another 15-minute video (45 minutes in all… I should’ve made it a DVD!! :-D). I’ve had a lot of trouble with Windows Movie Maker lately but, fingers crossed, it is stable right now after much downloading and updating of various bits and pieces!

I’m also aware that today is the 1st of June and I’d like to be looking to move out of my mum’s home by Christmas, which will coincide with the dreaded clearout of my workshop… I could have three months left; I could have five. I recently put some sash clamps for sale over on UKWorkshop and there’ll be other little bits to come between now and whenever ‘then’ may be.

Thanks to you all. πŸ™‚

Toolmaker

In case you don’t follow me on Keek, I’ll try to keep this brief… I got up on Sunday morning with a view to replacing the fence posts after repairing and reassembling the panel (as you saw in my previous post). For this, I would need a sledge hammer. Not owning one and knowing that, if I did buy one, I might not use it again for a very long time; I turned to Freecycle for some assistance, asking whether anyone might be inclined to lend me one for the weekend. No such offers came in, until I received an e-mail from a woman who offered me a head without a handle. As a woodorker though, that didn’t seem like much of a problem! πŸ˜‰

Sledge hammer with a bespoke handle, wedged in to place.

That was my thinking when I collected the lump on Friday afternoon. By the time Sunday came around, I decided that I wanted to get the job done and headed to Toolstation to buy a handle (along with some other bits I needed) in an effort to save myself some time. That didn’t fit and I would end up making one from scratch, which did occupy my time until lunch.

There’s a video of this whole process below and, underneath that, you’ll find photos and details of another ‘agricultural’ tool that I made yesterday.

Read more of this post

Wood Shoppin’ Time!

If I look back, it’s more than three-long-years since I last splurged a serious amount of money (more than Β£35) on a quantity of sawn hardwoods! That’s quite a saddening statistic that makes me question what the heck I’ve been doing since I bought all that ash and walnut for the chair in my final year of college.

Stack of 2in black walnut at Oscar Windebank.

That ended this morning, with a trip to Oscar Windebank in Box (between Bath and Chippenham).

Read more of this post

Yandles Spring Show – 5th-6th April 2013

Earlier today, I did indeed complete the drive south down to Yandles for the annual spring woodworking show (they also hold an autumn show in September, in case you didn’t know.

While I was there, I made the brave effort to get my camera out and to shoot a brief sequence of video clips that would give an impression of what’s available at one of these shows. It was a big step for me and I had to overcome a lot of anxiety to simply get my camera out of its bag, whilst walking alone through such a heavily occupied arena. Above, you can see the results of my work and an hour’s worth of editing this evening.

There’s a little more detail to follow if you read on below this line but I do welcome your comments, thoughts, opinions and feedback. πŸ™‚

Read more of this post

%d bloggers like this: