Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: KD fittings

Bench Repair (Part 4)

With the seat assembled and the bulk of the work on this repair job complete (ignoring the other seat, which suffered a similar fate to the first one, very recently), the last step before finishing was to create two new rails that would allow me to attach this new seat to the legs of the existing frame.

I didn’t have enough meranti left to do this but, I did have some iroko which is, in all fairness, likely to outlast the rest of the entire bench structure, if left untreated over the next few years! I used one of the original rails as a template to directly mark all the significant features on to the new wood (length, hole locations, mortise positions and the radiused ends).

Read more of this post

Workbench Recap

Back in the Summer of 2009, I built ‘my own’ workbench from British beech and briefly documented the build process on my previous blog, over on the UKworkshop site. Sadly, this function of the site is no longer available, even to viewers – which is a shame, as I used to see a fair amount of traffic coming through to this blog from there… 😉 For the not-too-distant future, I’m considering a couple more upgrades for my ‘bench, which would basically involve splitting the top in two (so that I could centralise the tool well) and fit a wagon vice on one end; all as detailed in the brand-new issue of British Woodworking magazine. For a preview on that article, if you haven’t seen this issue, take a look at Nick Gibbs’ blog. In the mean time, I thought I’d keep you entertained with a second look (for some) of how it all went together. Of course, for those of you who haven’t seen this ‘bench before, I hope there’s something you can take away from it all.

It all started when I flattened my car following a routine trip to Interesting Timbers

Read more of this post

%d bloggers like this: