Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: jig

YouTube Update – August 2013

Since my last video update, I seem to have added two more films to my YouTube channel – I guess this delay in notifying you is another reason for you to PLEASE SUBSCRIBE to my channel, so that you find out before… You do?

I’d like to say a big THANK YOU for everyone has already subscribed because I have just this week passed the 600 mark – at this rate, I might just make it to 1,000 before 2014! 😉

My first video is the making of the toilet roll holder, which has already soared to almost 1,000 views in less than one week! It’s a ‘silent’ film, in the sense that I don’t narrate over or talk through any part of it. Some people dislike that but most seem welcome to it, judging by my current response. I’m always welcome to hearing what more people think and I’m keen to keep trying new things in future videos.

After that, you have a near-ten-minute film on setting the knives in my Axminster AW106PT, which I use solely as a thicknesser. I do talk through that one (a non-narration) and again, I’m always welcome to feedback on that as well.

I’m aiming to have a brand-new project-based video out by… Let’s say Monday night, as it is a Bank Holiday weekend! 😉

Thanks for reading, watching, subscribing, liking and have a great weekend! 🙂

Picture Frame Video

This video was uploaded very late on Saturday night. It might even have been close to midnight, as I remember waking up on the end of my bed (I must have fallen asleep prematurely) at 1.15am, to discover that I’d already received 3 likes and my first comment on YouTube! I’ve taken a lot of positives from this one since, as I’m almost now up to 20 Likes for this one video, while still under 200 views in total.

As I say in the beginning; it was my first attempt at a narration and clearly, it works very well. I was actually hoping that I could’ve cut the footage down to around 8 minutes for this but I’m satisfied with 11.30 and, according to the statistics and comments; so are the majority of the viewers so far.

Tomorrow night, I’m hoping to upload the jig-making add-on to this, where I show you how I made the jig for my mitre saw. Then, over the weekend, I’m aiming to have another small project for you to view.

Enjoy and thank you!

[New Video] Truing a Bandsaw Tyre

This is the subject of my latest YouTube video, which has just been uploaded this evening. There are probably a few other recent uploads that I haven’t announced to all of you directly so, it is always worth manually checking my channel from time to time (and, of course; subscribing makes that even easier!). I seem to have created a situation where I have a stack of video content on my hard drive (a good three or four videos-worth). This is a complete contrast to my situation earlier in the year, where I was struggling to even record the basic content for editing… Now, I can’t seem to keep up with myself! 😉

Truing a bandsaw tyre has often been a popular topic for this blog and it certainly brings its share of traffic my way from some of the usual search engines. I’m aiming to have at least one more tool-relevant video on the way soon but, over the weekend, I hope you bring you footage of a small project (yes, an actual project) that I completed last week. If you’re really lucky, it may even feature my first attempts at narration!

As always, constructive feedback is welcome but I hope you hope you find this one useful and informative at the very least.

Thank you. 🙂

Jointer Knife Setting Jig

After tidying up my router table this morning and adding the final touches with the featherboard accessories (photos to follow in another post), I spent the afternoon machining up some timber for a small job (yes, timber – not dusty MDF!) and also set about making a pair of simple-but-effective setting jigs for the knives (blades) on my 6in wide CT150 surface planer (jointer).

Read more of this post

Insert Post, Here!

With the lippings attached and flushed off with a combination of router and belt sander, I was ready to start doing further work to the top as Saturday came.

What I needed to do next was to creating a recess for the aluminium insert plate and an opening for the router to fit in to. This may look like something that’s difficult to achieve but, I aim to show you a method I like that’s easy and very effective in providing you with a neat end result.

Read more of this post

Once Upon a Wall Shelf

I’ll save you from another moan about my lack of money as it certainly doesn’t have to halt your productivity, when it comes to working with wood. If it’s suitable for what you intend to make or build then, there are many options available if you’re wanting to get your hands on some ‘free’ wood. Some people prefer to break up old pallets, for example, which can be great for outdoor stuff. You might have to work a bit harder to carefully salvage what you can, de-nail it and then to clean it up a bit but, there are rewards to be gained in the long run. This time though, I’ve opted to recycle a piece of furniture I made back in the summer of 2005, when I was just beginning to discover the ‘workshop‘ that had been lurking around the back of our house for over a year…

Actually, this was the first project I completed in my own workshop (which I still occupy, to this day). How I wish I had some photos of the space back then… It really was such a contrast to today’s ‘shop… While it was dark, there was also lots of SPACE! I used to manage quite well with just a few decent power tools and a cheap and nasty table saw (no planer/thicknesser; all timber bought in as PAR). I often wonder it would be like to go back to those roots… Maybe I will, some day.

But, Power Tool Woodworking is for another post, a different day and hopefully not for another year or so just yet! Let’s get on and take a look at what I’ve been working on, now that I’m back in action…

Read more of this post

Biscuit Jointer Jig

As promised last week, after rounding-off the American lime Wall Shelf project, I’ll now show some more detail on the jig I used to accurately position the shelves and also, how I made it.

Read more of this post

Picket Planters (Part 3)

As I’m sure you’ve guessed simply from reading the title of this post, the third instalment of the Picket Planters series is now live on YouTube. Now, it’s time to get busy doing some “more interesting” work on this project. You get to see the jigs I made to do the round-topping and how the Supertuff blades from Tuff Saws perform.

In retrospect, I do wish I’d filmed a longer scene for each of the two round-topping sections (that’s the pickets and also the posts). I can see now how it might appear to be quite ‘short-lived’, with only one cut recorded for each operation. It comes across as very brief, in contrast to the rest of the video, I think. Especially when I wanted this to be the main focal point of this episode… 🙄

We live and learn and learn is always the latter! Winking smile

Part 4, once it’s ready, will show you how I came to assemble these planters – and, with the larger one of the two in particular, it wasn’t easy with the low roof I fitted earlier this year!

Thanks for watching!

%d bloggers like this: