Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: iroko

Bench Repair (Part 4)

With the seat assembled and the bulk of the work on this repair job complete (ignoring the other seat, which suffered a similar fate to the first one, very recently), the last step before finishing was to create two new rails that would allow me to attach this new seat to the legs of the existing frame.

I didn’t have enough meranti left to do this but, I did have some iroko which is, in all fairness, likely to outlast the rest of the entire bench structure, if left untreated over the next few years! I used one of the original rails as a template to directly mark all the significant features on to the new wood (length, hole locations, mortise positions and the radiused ends).

Read more of this post

Bench Repair (Part 2)

Over the weekend, I made further progress on the bench seat repair and started by preparing all my previously sawn stock down to finished dimensions.

When I’m working with timber that’s been at least partially sawn on a circular saw, which leaves a much cleaner finish than most bandsaw blades, I find it helpful to scribble over the sawn faces to void confusion later. Unless your planer knives are razor-sharp, it can sometimes be tricky to distinguish the prepared face and edge from the two other surfaces… On a few occasions, yes, I have made the mistake of referencing off the wrong face and edges when feeding stock through a thicknesser! 😳

Read more of this post

Bench Repair (Part 1)

Fear not – that title bears no relevance to my workbench!! 😉

A few years ago, my mum purchased this two-seater bench-and-table combination piece, probably from one of the many catalogues she keeps under the stairs… It’s made from some kind of dark or ‘red’ hardwood and although, at first glance, you may think this timber looks quite durable, a closer look at the slats on one of the seats tells a different story…

Read more of this post

Bad Door Made Good (Part 3)

As I’m still waiting for the weather to improve so that I can finish painting our new back door and show you some finished shots; in the meantime, I thought I’d try and update you a bit about what went on in between the previous post and now. Although I didn’t take any ‘progress’ shots of the door hanging-process in action, I can at least show you the kind of state my workbench ends up in – even though I’m working away from the workshop…!

Not a pretty sight!

Read more of this post

%d bloggers like this: