Olly Writes

Woodwork, writing, walks, DIY and more!

Tag Archives: circular saw

Picture Frame and Mitres

My next video on YouTube should document the making of a small picture frame made from a minute quantity of English walnut. Today, I’m going to share with you a bit about making the mitres on each of the four corners, as I took an opportunity to try and saw blade I’d not tested before and I’d like to share some of my thoughts on that.

Mitre Cutting Time!

I also decided to make a mitre-cutting jig for my mitre saw and there will be a shorter video showing how I made that, to be uploaded within days of the picture frame project going live.

Read more of this post

Advertisements

Coming Together

Just a bit of an update for you on how things are going, as I’m part way between completing the final glue-ups of these boards; making my way in and out of the workshop throughout the course of the weekend in order to remove one board from the clamps and then to insert another.

Crosscutting with a skil saw.

Read more of this post

First Lot to Go

It may be cold outside and there may still be snow on the ground, with the threat of more to follow later in the week but, I still made it out to the workshop today! Only to arrange some hand and portable power tools that I no longer ‘need’ and can sell… Still, it was nice to get out there briefly. Even though my work gloves felt like sheets of ice, as I picked them up from my workbench.

ALL FOR SALE!

This is my first ‘wave’ in the process of decluttering my workshop, freeing up some space and, of course, preparing for the inevitable. Read on below, and you’ll see what I’m selling and why I no longer need it.

Read more of this post

Router Table Begins!

This weekend, the weather’s been so nice that I couldn’t think of a better way to spend my Saturday afternoon that cutting up a sheet of dust-ridden 18mm MDF on the drive! 😀

Staddons must’ve received their delivery later on Friday afternoon, as they had a sheet ready to cut to size by the time I arrived on Saturday morning. After studying a cutting sheet I’d set out using the components in Google SketchUp, I asked them to crosscut the sheet at 1600mm, leaving <840mm x 1220mm on the other end. I was a bit optimistic when I assumed that this would fit to my small van with ease… It did fit but, the larger half was angled at a position that meant it resting against my head during the short journey back to the workshop! I wish I’d taken a photo! 😉

Read more of this post

New (Old) Power Tool!

After splashing out (!) on a few basic hand tools last week, I returned to the market for used goods in search of something with a plug on the end of it… I’ve probably moaned before about the fact that I don’t have any cash to spare for woodworking and tool purchases, these days. Perhaps then, I should also explain that I made a bit of money on eBay over the weekend, as I said goodbye to a stash of Nintendo computer games (‘video games‘, if you prefer…) and all those childhood memories of the many hours spent sat in front of a TV screen. Don’t worry though, I’m not spending it all in one go…

It’s been a few years (three, to my counting) since I’ve owned portable circular saw (skil saw) like this.

Read more of this post

Pondering the Plunge

Whether you know them as ‘track saws’ or simply as ‘plunge saws’ that fit on to a compatible guide track, these circular saws  have been around for a few years now. I could be wrong but, I think it all started with a predecessor to Festool’s hugely-popular TS55. In the last three years alone, we’ve seen rival competitors release their own plunge saw/guide rail systems. Some might say that it’s never been a better time to be in the market for one of these power tools… To others, perhaps there is too much to choose from with not an awful lot to separate one saw from the next…

Read more of this post

Sheet Goods Support Frame

Last weekend’s time in the workshop felt very similar to the weekend before, where I basically made a table enclosure, in to which a chest freezer could be tucked safely away. This time though, it was all about preparing myself for another workshop project that’s just over the horizon – for which, I’ll need to safely support and cut down some sheets of 18mm plywood…

It all started with with these scraps of ex. 7x2in treated pine; left overs from the ceiling joists I installed earlier this year. And, just like the Saturday before, most of my time was spent cutting notches out on my sliding compound mitre saw.

Read more of this post

Making a T&G Gate (Part 3)

As we take one giant leap backwards to a point before the second post on this project, we begin to discover just how messed up the timeline is on this one! At least, with the way I’ve posted it…

Of course, before I could fit the gate in to its newly-created opening, even for a single night, I had to trim the boards so that the gate would actually fit…

Read more of this post

%d bloggers like this: